Serving the Akron area  ·  (330) 294-6948  ·  Open Mon-Sun 7am-7pm
📞 (330) 294-6948 Free Quote

Metal Roofing in Tallmadge, OH (44278) · Local Professionals

Akron Metal Roofing · Fast response in Tallmadge and the Akron area · Free estimate 24h

✅ Licensed Contractor 🛡️ Licensed & Insured 💸 Free Quote 24h 🕐 Mon-Sun 7am-7pm
+354Verified Reviews
10Years in Business
4.9 ★Google Rating
24/7Available
✅ No hidden fees💳 Cards accepted🛡️ Licensed & Insured

Tallmadge is the kind of town where a 1950s brick ranch on a quiet circle can sit a mile from a brand new subdivision off Southeast Avenue. The housing stock here is a mix of colonials, ranches, and Cape Cods, many with steep pitches and mature trees that drop limbs and shade the roof all winter. If you live near the Tallmadge Circle or in one of the older neighborhoods off West Avenue, you know how freeze-thaw cycles and lake-effect snow can work on a roof.

Homeowners in 44278 call Akron Metal Roofing because we understand this mix of older homes and newer builds. We have replaced shingles with standing seam on ranches near Munroe Falls Avenue and repaired flashing on colonials close to Tallmadge High School. We know the local building department, the HOA design reviews, and the way ice dams form on north-facing eaves here.

Metal Roofing in Tallmadge (44278)

Tallmadge sits on high ground east of Akron, and that elevation means heavier snow loads and more freeze-thaw cycles than the valley below. The older neighborhoods near the circle have narrow lots with mature sugar maples and oaks, so access can be tight and shade keeps roofs cold, which encourages ice dams. Newer subdivisions off Howe Avenue and North Avenue have steeper pitches and HOA rules about panel profiles and colors. We work with both. For the colonials and ranches common here, stone-coated steel is a popular choice because it mimics the look of shingle while handling snow and hail better. Standing seam is also growing fast on homes with simple gable roofs. We also handle the older homes near Tallmadge Middle School, where flashing and chimney repairs are common after decades of freeze-thaw.

Our team has been serving Tallmadge and the surrounding Akron area for years. We know the local building department, the permit thresholds, and the inspection process. We also understand how to document storm damage for insurance claims, though coverage is always up to your carrier.

Our services in Tallmadge

How a Job Works in Tallmadge

Step 1: You call us at (330) 294-6948 or request a free estimate online. We schedule an on-site assessment, usually within a few days. We inspect your roof, check the attic and flashing, and talk through options like stone-coated steel or standing seam. You get a written estimate with pricing and timeline.

Step 2: Once you approve, we pull the permit from the City of Tallmadge and schedule the work. For homes in HOAs, we coordinate with your board on color and profile approvals. On tight lots near the circle, we plan material delivery and staging carefully. Most residential roofs take two to four days, depending on size and weather.

Step 3: We clean up daily and do a final walkthrough with you. We haul away all old materials, use magnetic sweeps for nails, and make sure gutters and downspouts are clear. You get a written warranty and care instructions. We leave your property clean and your roof ready for the next Ohio winter.

Pricing in Tallmadge depends on roof size, pitch, access, and material. For a typical ranch or colonial, metal roof installation starts at $8 per square foot, standing seam at $10, and stone-coated steel at $9. A full replacement starts at $9 per square foot, and a retrofit over existing shingles starts at $7, though code limits how many layers you can cover. Repairs start at $450, and leak repairs also start at $450. Screw replacement and re-fastening start at $750. Snow guards start at $1,200, and gutter work starts at $9 per linear foot. We provide free estimates and inspections, so call (330) 294-6948 to get a ballpark for your home.

My 1950s ranch near the Tallmadge Circle has ice dams every winter. Can a metal roof help?
Yes. Metal roofs shed snow better than asphalt, especially when paired with proper attic insulation and ventilation. For homes around the circle, we often recommend standing seam or stone-coated steel with snow guards to control sliding. We also check flashing and eaves, since ice dams often start at warm spots. A free inspection will tell you if a metal roof or targeted repairs make more sense.
A storm just blew some shingles off my roof in Tallmadge. How fast can you respond?
We offer free storm damage inspections and can usually get someone out within 24 to 48 hours after a storm. Call (330) 294-6948 and we will schedule a visit. If there is active leaking, we can do emergency repairs to prevent further damage. We also help document damage for insurance claims, but coverage decisions are up to your carrier.
What does a metal roof cost for a typical three-bedroom ranch in 44278?
For a 1,500 to 2,000 square foot ranch, most metal roof installations run between $12,000 and $20,000 depending on material and complexity. Stone-coated steel and standing seam are at the higher end. Repairs are much less, starting at $450. We give free estimates with exact pricing after inspecting your roof, access, and current condition.
Do I need a permit from the City of Tallmadge for a metal roof replacement?
Yes, a roofing permit is typically required for a full replacement or re-roof in Tallmadge. Requirements and fees vary, so we always confirm with the city building department before starting. We handle the permit application and inspections for you. If your home is in a historic district or HOA, there may be additional design review.
My HOA requires a certain roof color. Can you help with approval?
We work with HOAs in Tallmadge regularly. We can provide color samples and product specs for your board's review. If your HOA has design guidelines, we make sure the panel profile and color meet them before ordering materials. For property line questions, we follow local setback rules and can recommend a survey if needed.
Are you fully insured for work at my Tallmadge home?
Yes, we carry general liability insurance and workers' compensation coverage. This protects you and our crew if anything happens on your property.
What maintenance does a metal roof need in Tallmadge's climate?
Metal roofs are low maintenance, but in our climate we recommend an annual inspection, especially after winter. Check for loose fasteners, debris in gutters, and snow guard condition. We offer free inspections and can replace screws or re-fasten panels starting at $750. Keeping trees trimmed away from the roof also helps prevent limb damage and moss growth.
Why choose us?

Trusted professionals in Akron

🏅

Licensed contractors

Continuous training, professional equipment, meticulous and code-compliant work

🛡️

Licensed & Insured

Full coverage on all our job sites, no exceptions

⚡

Available Mon-Sun 7am-7pm

Emergencies, weekends, holidays: available when you need us

💰

100% Free Quote

Response within 24h, no commitment, by phone or form

Our services

Our Metal Roofing Services in Akron

All your work handled by qualified professionals in Akron

Metal Roof Installation

Complete metal roof systems engineered for your local climate and built to outlast three shingle roofs.

Included in your service

  • Deck inspection and repair before any panel goes on
  • High-temp synthetic underlayment and correct ridge and soffit ventilation
  • Manufacturer-certified panel, trim, and flashing details for the full warranty
  • Free on-site assessment and written estimate within 24h
Learn more→

Standing Seam Metal Roofing

Concealed-fastener standing seam: no exposed screws to loosen, leak, or need re-torquing.

Included in your service

  • Panels roll-formed to the exact length of your roof, no end laps
  • Mechanically seamed or snap-lock profiles with concealed clips
  • Floating clip system that lets panels expand and contract freely
  • Kynar 500 / PVDF finish in the full architectural color range
Learn more→

Metal Roof Replacement

Full tear-off of an end-of-life shingle, cedar, or metal roof, replaced with a complete new system.

Included in your service

  • Tear-off and haul-away of the old roofing, dumpster included
  • Decking inspected board by board, rot and soft spots replaced
  • New underlayment, drip edge, valleys, and penetration flashing throughout
  • Documentation of the finished system for your insurer or future buyer
Learn more→

Metal Roof Over Shingles (Retrofit)

Retrofit metal installed over sound existing shingles: no tear-off, less waste, lower cost.

Included in your service

  • Honest deck and shingle assessment first, recover only when it is the right call
  • Furring strips or slip sheet as the panel profile and local code require
  • Existing vents, pipe boots, and flashings reworked to the new roof plane
  • Straight guidance on when tear-off is the better long-term choice
Learn more→

Metal Roof Repair

Targeted repair of damaged, loose, or storm-hit metal roofing before it reaches your ceiling.

Included in your service

  • Bent, dented, or punctured panels replaced and color-matched
  • Seams, laps, and penetrations resealed with compatible butyl and sealant
  • Failed pipe boots, closures, and ridge cap fasteners renewed
  • Written findings with photos of what we found and what we fixed
Learn more→

Metal Roof Leak Repair

Priority leak response: we trace the leak to its real source instead of caulking the symptom.

Included in your service

  • Water testing and interior tracing to find the true entry point
  • Backed-out fasteners, separated seams, and flashing gaps corrected at the cause
  • Emergency tarping available same day after a storm
  • Attic and insulation moisture check so hidden damage does not sit and spread
Learn more→

Screw Replacement & Re-Fastening

The top cause of leaks on 15 to 30 year old screw-down roofs, fixed for a fraction of replacement.

Included in your service

  • Every fastener replaced with oversized screws and new EPDM sealing washers
  • Dried-out washers and stripped holes addressed panel by panel
  • Ridge, eave, and sidewall closures renewed at the same time
  • Restores a watertight roof without replacing sound panels
Learn more→

Corrugated & Ribbed Panel Roofing

Corrugated, tuff-rib, and 5V panel roofing: the budget-friendly workhorse for homes and outbuildings.

Included in your service

  • Galvalume and painted steel panels cut to length on site
  • Correct screw pattern and torque so washers seat without over-driving
  • Foam and metal closures at ridge, eave, and rake to keep weather and pests out
  • Full color range for homes, cabins, barns, and workshops
Learn more→

Metal Shingle Roofing

The look of architectural shingle, slate, or shake with the lifespan and wind rating of steel.

Included in your service

  • Interlocking stamped steel or aluminum shingle panels
  • Walkable finished surface, easier to service than a standing seam field
  • Lightweight enough for retrofit over an existing roof structure
  • Profiles and colors that suit historic and HOA-governed neighborhoods
Learn more→

Stone-Coated Steel Roofing

Steel strength under a textured stone finish, with strong hail and wind performance.

Included in your service

  • Acrylic-bonded stone granule surface over structural steel
  • Battened or direct-to-deck installation depending on the profile
  • Class A fire rating and high impact resistance ratings
  • Tile, shake, and shingle textures for suburban and coastal homes alike
Learn more→

Copper & Specialty Metal Roofing

Copper, zinc, and aluminum for porches, bay windows, dormers, and full architectural roofs.

Included in your service

  • In-house fabrication of pans, valleys, and custom curved details
  • Soldered seams and joints where the detail calls for it
  • Isolation of dissimilar metals to prevent galvanic corrosion
  • A living patina that develops over decades of service
Learn more→

Metal Roof Coating & Painting

Restoration for faded, chalking, or surface-rusted metal, adding 10 to 15 years without replacement.

Included in your service

  • Wash, degrease, and mechanical prep of the entire panel surface
  • Rust treatment and primer on affected areas before topcoat
  • High-performance elastomeric or silicone coating system applied to spec
  • Honest assessment first: we say so when the roof is past coating
Learn more→

Flashing, Chimney & Skylight Repair

Flashing is the number one leak point on any metal roof, and it is what we fabricate best.

Included in your service

  • Custom bent step, counter, and apron flashing made in-house
  • Chimney crickets to shed water on the uphill side
  • Skylight curbs and head flashing rebuilt to the panel profile
  • Valley and wall transition details closed with matching trim
Learn more→

Snow Guards & Ice Protection

Snow retention that stops rooftop avalanches onto decks, gutters, walkways, and entryways.

Included in your service

  • Pad-style guards or continuous rail systems matched to your panel
  • Layout calculated from roof pitch, panel length, and local snow load
  • Clamp-on mounting on standing seam, no panel penetrations
  • Ice dam and eave detailing for higher-elevation homes
Learn more→

Storm & Wind Damage Repair

Wind, hail, and fallen-limb repair with thorough documentation and a straight repair-or-replace answer.

Included in your service

  • Free post-storm inspection with dated photo documentation
  • Emergency tarping and temporary weatherproofing when needed
  • A written report you can use when documenting your insurance claim
  • Honest assessment of repair versus replacement, with no pressure either way
Learn more→

Metal Roof Inspection

A written, no-obligation assessment of fastener condition, seams, flashing, and remaining service life.

Included in your service

  • Fastener, washer, and seam condition checked across the field
  • Flashing, penetrations, and closures inspected point by point
  • Coating wear, chalking, and corrosion graded panel by panel
  • Written report with photos and a straight answer on years remaining
Learn more→

Gutters for Metal Roofs

Gutters sized and hung correctly for metal roofing, where standard hangers and spacing do not work.

Included in your service

  • Seamless aluminum or half-round systems formed on site
  • Hanger placement and spacing matched to the panel profile
  • Oversized capacity and downspouts sized for heavy regional rainfall
  • Bracket spacing tightened for high-wind zones so storms do not tear the gutter off
Learn more→

Commercial & Agricultural Metal Roofing

Barns, workshops, churches, and light commercial metal roofing across the county.

Included in your service

  • Long-run panels for wide spans and low-slope structures
  • Purlin and framing attachment detailed for the building type
  • Insulation, vapor barrier, and condensation control options
  • Repairs and re-fastening for aging agricultural metal buildings
Learn more→
Verified client reviews

354+ Verified Client Reviews in Akron

⭐⭐⭐⭐⭐ 4.9/5 · 354 verified Google reviews

Free Quote

Get Your Free Quote

Metal Roofing in Akron · Response within 24h · No commitment · ☎ (330) 294-6948

Your Free Quote Request

Confidential · Response within 24h

✅ Free personalized estimate ⚡ Response within 24h 🛡️ Licensed & Insured 📍 On-site visits included in Akron ✅ No hidden fees 🕐 Available Mon-Sun 7am-7pm